Your Title Goes Here

Solution Description

TaiBang Motor Industry Team Co., Ltd.

The main goods is induction motor, reversible motor, DC brush equipment motor, DC brushless equipment motor, CH/CV massive equipment motors, Planetary gear motor ,Worm gear motor etc, which utilized commonly in different fields of producing pipelining, transportation, meals, medicine, printing, material, packing, workplace, apparatus, enjoyment and many others, and is the chosen and matched product for automated device. 

Motor Design Instruction

4RK25GN-C 

        four R K 25 R GN C  
Body Size Type Motor sequence Energy Speed
Management
Motor
Shaft Kind Voltage Accessory
two:60mm

three:70mm

4:80mm

5:90mm

six:104mm

I:Induction

R:Reversible

T:Torque

K series 6W

15W

25W

40W

60W

90W

120W

140W

180W

200W
 

A:Round Shaft

GN:Bevel Equipment Shaft
       (6W,15W,25W,40W)

GU:Bevel Gear Shaft
      (60W,90W,120W,140W,180W,200W)

A:Solitary Phase 110V

C:One Period 220V

S:3-Phase 220V

S3:3-Stage 380V

S4:3-Section 440V

T/P:Thermally Secured

F:Admirer

M:Electro-magnetic
    Brake

Gear Head Design Instruction

4GN-100RC

4 GN one hundred K  
Body Dimensions Shaft Sort Equipment Reduction Ratio Bearing Type Other info
2:60mm

3:70mm

four:80mm

five:90mm

six:104mm
 

GN:Bevel Equipment Shaft
      (60#,70#,80#,90# reduction gear head)

GU:Bevel Equipment Shaft
      (100# reduction equipment head)

GM:Intermediate Equipment Head

GS:Gearhead with ears

one:one hundred K:Regular Rolling Bearing

RT:Right Angle With Axile

RC:Proper Angle With Hollow Shaft
 

This sort of as shaft diameter,shaft duration,and many others.

Specification of motor 25W 80mm Fastened velocity AC gear motor

Type  Gear Tooth Output Shaft Power
(W)
Frequency
(Hz)
Voltage
(V)
Current
(A)
Start Torque
(g.cm)
Rated Gearbox Type
Torque
(g.cm)
Speed
(rpm)
Bearing Gearbox Middle Gearbox
Reversible Motor 4RK25GN-C  twenty five fifty 220 .30 1950 1950 1250 4GN/GU-K 4GN10X
twenty five 60 220 .27 1650 1620 1500 4GN/GU-K 4GN10X

Gear Head Torque Desk(Kg.cm)                                                                                                                                                                                         (kg.cm×9.8÷100)=N.m

Output Velocity :RPM 500 three hundred two hundred a hundred and fifty a hundred and twenty one hundred 75 sixty fifty thirty 20 fifteen ten 7.5 6 5 3
Speed Ratio 50Hz three five seven.5 10 12.five 15 twenty 25 30 fifty seventy five 100 a hundred and fifty 200 250 300 five hundred
60Hz 3.6 six 9   fifteen eighteen   thirty 36 60 ninety one hundred twenty one hundred eighty   300 360 600
Allowed
Torque
25W kg.cm 4 6.seven 10 13.3 16 20 26.seven 32 39 sixty five 80 eighty 80 eighty eighty eighty eighty
30W kg.cm four.8 eight 12 sixteen 20 24 32 38 forty six seventy six 80 eighty eighty 80 80 80 eighty
40W kg.cm 6.7 11 sixteen 21.three 28 33 42 54 sixty five eighty eighty 80 80 80 80 eighty 80
Note: Velocity figures are primarily based on synchronous pace, The actual output velocity, underneath rated torque situations, is about ten-twenty% much less than synchronous velocity, a gray track record signifies output shaft of geared motor rotates in the same direction as output shaft of motor. A white background signifies rotates rotation in the opposite route.

Exterior Dimension

4I(R)K25/4A(GN)(   )

Variety Reduction Ratio L1
mm
L2
mm
L3
mm
4RK25GN 1:3~1:20 86 32 118
1:twenty five~1:a hundred and eighty eighty five 44 one hundred thirty

4I(R)K25/4GN(    )RC

4I(R)K25/4GN(    )RT
Previously mentioned drawing is for regular screw gap.If want via gap, terminal box, or digital magnet brake, need to have to notify the vendor.
 

Connection Diagram:

FAQ

Q: How about your business?
A:We are gear motor factory found in HangZhou city of China,we start from 1995 ,we have far more than 1200 workers ,main merchandise is AC micro gear motor 6W to 250W, AC small equipment motor 100W to 3700W,brush DC motor 10W to 400W,brushless motor 10W to 750W,drum motor 60W to 3700W ,Planetary gearbox ,worm gearbox and so forth .

Q: How to choose a appropriate motor?
A:If you have gear motor images or drawings to display us, or you notify us detailed specs like voltage, pace, torque, motor measurement, working mode of the motor, needed life span and sounds level and many others, please do not be reluctant to enable us know, then we can advise suited motor for each your request .

Q: Can you make the equipment motor with customizedize specifications ?
Of course, we can customise for each your request for the voltage, velocity, torque and shaft size and form. If you need to have further wires or cables soldered on the terminal or require to insert connectors, or capacitors or EMC we can make it as well.

Q: What’s your lead time?
A: Usually our typical normal merchandise will require 10-15days, a bit for a longer time for customized goods. But we are very versatile on the lead time, it will rely on the specific orders.
Q: What is your MOQ?
A: If supply by sea ,the minimum purchase is 100 items, if supply by specific, there is no restrict.
Q: Do you have the product in stock?
A: I am sorry we do not have the product in stock, All items are produced with orders.
Q: How to contact us ?
A: You can ship us enquiry . 

US $20-100
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industrial
Speed: Constant Speed
Number of Stator: Single-Phase
Function: Driving, Control
Casing Protection: Closed Type
Number of Poles: 4

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

        4 R K 25 R GN C  
Frame Size Type Motor series Power Speed
Control
Motor
Shaft Type Voltage Accessory
2:60mm

3:70mm

4:80mm

5:90mm

6:104mm

I:Induction

R:Reversible

T:Torque

K series 6W

15W

25W

40W

60W

90W

120W

140W

180W

200W
 

A:Round Shaft

GN:Bevel Gear Shaft
       (6W,15W,25W,40W)

GU:Bevel Gear Shaft
      (60W,90W,120W,140W,180W,200W)

A:Single Phase 110V

C:Single Phase 220V

S:3-Phase 220V

S3:3-Phase 380V

S4:3-Phase 440V

T/P:Thermally Protected

F:Fan

M:Electro-magnetic
    Brake

###

4 GN 100 K  
Frame Size Shaft Type Gear Reduction Ratio Bearing Type Other information
2:60mm

3:70mm

4:80mm

5:90mm

6:104mm
 

GN:Bevel Gear Shaft
      (60#,70#,80#,90# reduction gear head)

GU:Bevel Gear Shaft
      (100# reduction gear head)

GM:Intermediate Gear Head

GS:Gearhead with ears

1:100 K:Standard Rolling Bearing

RT:Right Angle With Axile

RC:Right Angle With Hollow Shaft
 

Such as shaft diameter,shaft length,etc.

###

Type  Gear Tooth Output Shaft Power
(W)
Frequency
(Hz)
Voltage
(V)
Current
(A)
Start Torque
(g.cm)
Rated Gearbox Type
Torque
(g.cm)
Speed
(rpm)
Bearing Gearbox Middle Gearbox
Reversible Motor 4RK25GN-C  25 50 220 0.30 1950 1950 1250 4GN/GU-K 4GN10X
25 60 220 0.27 1650 1620 1500 4GN/GU-K 4GN10X

###

Output Speed :RPM 500 300 200 150 120 100 75 60 50 30 20 15 10 7.5 6 5 3
Speed Ratio 50Hz 3 5 7.5 10 12.5 15 20 25 30 50 75 100 150 200 250 300 500
60Hz 3.6 6 9   15 18   30 36 60 90 120 180   300 360 600
Allowed
Torque
25W kg.cm 4 6.7 10 13.3 16 20 26.7 32 39 65 80 80 80 80 80 80 80
30W kg.cm 4.8 8 12 16 20 24 32 38 46 76 80 80 80 80 80 80 80
40W kg.cm 6.7 11 16 21.3 28 33 42 54 65 80 80 80 80 80 80 80 80
Note: Speed figures are based on synchronous speed, The actual output speed, under rated torque conditions, is about 10-20% less than synchronous speed, a grey background indicates output shaft of geared motor rotates in the same direction as output shaft of motor. A white background indicates rotates rotation in the opposite direction.

###

Type Reduction Ratio L1
mm
L2
mm
L3
mm
4RK25GN 1:3~1:20 86 32 118
1:25~1:180 85 44 130
US $20-100
/ Piece
|
1 Piece

(Min. Order)

###

Application: Industrial
Speed: Constant Speed
Number of Stator: Single-Phase
Function: Driving, Control
Casing Protection: Closed Type
Number of Poles: 4

###

Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

        4 R K 25 R GN C  
Frame Size Type Motor series Power Speed
Control
Motor
Shaft Type Voltage Accessory
2:60mm

3:70mm

4:80mm

5:90mm

6:104mm

I:Induction

R:Reversible

T:Torque

K series 6W

15W

25W

40W

60W

90W

120W

140W

180W

200W
 

A:Round Shaft

GN:Bevel Gear Shaft
       (6W,15W,25W,40W)

GU:Bevel Gear Shaft
      (60W,90W,120W,140W,180W,200W)

A:Single Phase 110V

C:Single Phase 220V

S:3-Phase 220V

S3:3-Phase 380V

S4:3-Phase 440V

T/P:Thermally Protected

F:Fan

M:Electro-magnetic
    Brake

###

4 GN 100 K  
Frame Size Shaft Type Gear Reduction Ratio Bearing Type Other information
2:60mm

3:70mm

4:80mm

5:90mm

6:104mm
 

GN:Bevel Gear Shaft
      (60#,70#,80#,90# reduction gear head)

GU:Bevel Gear Shaft
      (100# reduction gear head)

GM:Intermediate Gear Head

GS:Gearhead with ears

1:100 K:Standard Rolling Bearing

RT:Right Angle With Axile

RC:Right Angle With Hollow Shaft
 

Such as shaft diameter,shaft length,etc.

###

Type  Gear Tooth Output Shaft Power
(W)
Frequency
(Hz)
Voltage
(V)
Current
(A)
Start Torque
(g.cm)
Rated Gearbox Type
Torque
(g.cm)
Speed
(rpm)
Bearing Gearbox Middle Gearbox
Reversible Motor 4RK25GN-C  25 50 220 0.30 1950 1950 1250 4GN/GU-K 4GN10X
25 60 220 0.27 1650 1620 1500 4GN/GU-K 4GN10X

###

Output Speed :RPM 500 300 200 150 120 100 75 60 50 30 20 15 10 7.5 6 5 3
Speed Ratio 50Hz 3 5 7.5 10 12.5 15 20 25 30 50 75 100 150 200 250 300 500
60Hz 3.6 6 9   15 18   30 36 60 90 120 180   300 360 600
Allowed
Torque
25W kg.cm 4 6.7 10 13.3 16 20 26.7 32 39 65 80 80 80 80 80 80 80
30W kg.cm 4.8 8 12 16 20 24 32 38 46 76 80 80 80 80 80 80 80
40W kg.cm 6.7 11 16 21.3 28 33 42 54 65 80 80 80 80 80 80 80 80
Note: Speed figures are based on synchronous speed, The actual output speed, under rated torque conditions, is about 10-20% less than synchronous speed, a grey background indicates output shaft of geared motor rotates in the same direction as output shaft of motor. A white background indicates rotates rotation in the opposite direction.

###

Type Reduction Ratio L1
mm
L2
mm
L3
mm
4RK25GN 1:3~1:20 86 32 118
1:25~1:180 85 44 130

Calculate the ideal mechanical advantage of pulleys

The basic equations for pulleys can be found in this article. It will also cover the different types of pulleys, the ideal mechanical advantages of pulleys, and some common uses of pulley systems. Read on to learn more! After all, a pulley is a simple mechanical device that changes the direction of a force. Learn more about pulleys and their common uses in engineering.
pulley

pulley basic equation

Pulleys work the same way as gravity, so they should withstand similar forces. Newton’s laws of motion can be used to calculate the forces in a pulley system. The second law of motion applies to forces and accelerations. Similar to this is Newton’s third law, which states that the directions of forces are equal and opposite. The fourth law dictates the direction of force. The Fifth Law states that tension is in equilibrium with gravity.
A pulley is a simple mechanism that transmits force by changing direction. They are generally considered to have negligible mass and friction, but this is only an approximation. Pulleys have different uses, from sailboats to farms and large construction cranes. In fact, they are the most versatile mechanisms in any system. Some of their most common applications and equations are listed below.
For example, consider two masses m. Those of mass m will be connected by pulleys. The static friction coefficient of the left stop is ms1, and the static friction coefficient of the right stop is ms2. A no-slip equation will contain multiple inequalities. If the two blocks are considered to be connected by a pulley, the coefficient of kinetic friction is mk. In other words, the weight of each block carries the same mass, but in the opposite direction.

Types of pulleys

A pulley is a device used to pull and push objects. Pulley systems are ropes, cables, belts or chains. The “drive pulley” is attached to the shaft and moves the driven pulley. They are available in a variety of sizes, and the larger they are, the higher the speed of power transmission. Alternatively, use small pulleys for smaller applications.
Two-wheel pulleys have two mechanical advantages. The greater the mechanical advantage, the less force is required to move the object. More wheels lift more weight, but smaller pulleys require less force. In a two-wheel pulley system, the rope is wound around two axles and a fixed surface. As you pull on the rope, the shafts above slowly come together.
Compound pulleys have two or more rope segments that are pulled up on the load. The mechanical advantage of compound pulleys depends on the number of rope segments and how they are arranged. This type of pulley can increase the force by changing the direction of the rope segment. There are two main types of pulleys. Composite pulleys are most commonly used in construction. The ideal mechanical advantage of pulleys is 2 or more.
Construction pulleys are a basic type. They are usually attached to wheel rails and can be lifted to great heights. Combinations of axes are also common. Construction pulleys can be raised to great heights to access materials or equipment. When used in construction, these pulleys are usually made of heavy materials such as wood or metal. They are secured with ropes or chains.

The ideal mechanical advantage of pulleys

The pulley system is a highly complex system with high mechanical advantages. Use a single pulley system to reduce the force required to lift an object by cutting it in half. The mechanical advantage increases as you add more pulleys, such as six or seven. To calculate the mechanical advantage of a pulley system, you need to count the number of rope segments between the pulleys. If the free end of the rope is facing down, don’t count it. If it’s facing up, count. Once you have your number, add it up.
The required mechanical advantage of a pulley is the number of rope segments it has to pull the load. The more rope segments, the lower the force. Therefore, the more rope segments the pulley has, the lower the force. If the rope segments are four, then the ideal mechanical advantage is four. In this case, the composite pulley quadrupled the load force.
The ideal mechanical advantage of a pulley system is the sum of the mechanical force and the force required to lift the load at its output. Typically, a single pulley system uses two ropes, and the mechanical force required to lift the load is multiplied by the two ropes. For a multi-pulley system, the number of ropes will vary, but the total energy requirement will remain the same. The friction between the rope and pulley increases the force and energy required to lift the load, so the mechanical advantage diminishes over time.
pulley

Common uses of pulley systems

A pulley system is a simple mechanical device typically used to lift heavy objects. It consists of a rotating wheel attached to a fixed shaft and a rope attached to it. When the wheel moves, the force applied by the operator is multiplied by the speed of the pulley, and the force is multiplied by the weight of the object being lifted. Common uses for pulley systems include pulling, lifting, and moving heavy objects.
The oil and petroleum industries use pulley systems in a variety of applications. Most commonly, pulleys are used in drilling operations and they are installed on top of the rig to guide the cable. The cable itself is attached to two pulleys suspended in the derrick, where they provide mechanical energy to the cable. Using a pulley system in this application provides the force needed to move the cable safely and smoothly.
The main advantage of the pulley system is that it minimizes the force required to lift an object. The force used to lift the object is multiplied by the desired mechanical advantage. The more rope segments, the lower the force required. On the other hand, a compound pulley system can have many segments. Therefore, a compound pulley system can increase the force a worker can exert on an object.
Safety Precautions to Take When Working on Pulley Systems

There are many safety precautions that should be observed when working on a pulley system. The first is to wear proper protective gear. This includes hard hats that protect you from falling objects. Also, gloves may be required. You should limit the amount of movement in the penalty area, and you should also keep the area free of unnecessary people and objects. Also, remember to wear a hard hat when working on the pulley system.
Another important safety precaution when working on a pulley system is to check the Safe Working Load (SWL) of the pulley before attaching anything. This will help you understand the maximum weight the pulley can hold. Also, consider the angle and height of the pulley system. Always use safety anchors and always remember to wear a hat when working on a pulley system.
Safe use of chain hoists requires training and experience. It is important to read the manufacturer’s manual and follow all safety precautions. If you’re not sure, you can actually inspect the hoist and look for signs of damage or tampering. Look for certifications for sprocket sets and other lifting accessories. Look for the Safe Working Load (SWL) marking on the chain hoist.
pulley

Example of a pulley system

Pulley systems are often used to lift items. It allows you to reduce the effort to lift and move the load by applying force in one direction. Pulley systems can be built and modeled to fit any type of project. This resource focuses on pulley systems and is designed to support the new GCSEs in Engineering, Design and Technology. There are also many examples of pulley systems suitable for various applications.
In the study, participants who read easy text took longer to manipulate the pulley system than those who read challenging text. In general, this suggests that participants with prior scientific experience used their cognitive abilities more effectively. Additionally, students who read simple texts spent less time planning the pulley system and more time on other tasks. However, the study did show that the time required to plan the pulley system was similar between the two groups.
In everyday life, pulley systems are used to lift various objects. Flagpoles are one of many pulley systems used to raise and lower flagpoles. They can also be used to raise and lower garage doors. Likewise, rock climbers use pulleys to help them ascend and descend. The pulley system can also be used to extend the ladder.

China AC Right Angle Gear Motor Reducer Fan Blower Vacuum Air Compressor Water Pump     pulley system	China AC Right Angle Gear Motor Reducer Fan Blower Vacuum Air Compressor Water Pump     pulley system
editor by czh 2022-11-27