Your Title Goes Here

Product Description

3inches Helical rotor solar pump,drinking water pump,pupming pump,vacuum pump (3 Years Warranty)

 

( 3 ~ 6 Inches Submersible & Area Photo voltaic Pump, photo voltaic h2o pump )

Leading High quality Submersible Photo voltaic Drinking water Pump for 3inches and 4inches

Photo voltaic panels  is to  convert sunlight into electrical power which will be passed to the photo voltaic pump controller,the power will be used to power the pump. 
Photo voltaic Controller /Inverte is utilised to stabilize the power voltage and output the electricity to push the electric motor of the pump. If backup batteries (optional) are obtainable, then the pump controller can cost them.
Battery is for Storaging the added  energy that can be utilised at later time when the daylight may not be adequate to travel the pump.
Drinking water Degree detector / Sensors is utilised to linked to the controller and can be used to shield the pump from managing dry as well as to immediately turn the pump off when a drinking water tank is complete.

 

SPECIFICATION
1.  Max Head : 20 — 320m
2.  Max Flow : .76 — 200 m3/hr
3.  Power : .1hp — 100hp
4.  Voltage : twelve V -120V 220V -540V
5.  Motor : DC motor & AC motor
6.  Material : SS304 & SS316
seven. Controller : mppt kind for Computerized restating

Application
1. Irrigation of agriculture
2. Consuming h2o and living water
3. Backyard garden irrigation
four. Fountains

Functions
one. The performance is enhanced 25% by the permanent magnetism,immediate current, brushless, non-sensor motor.
2. Undertake double plastic deal for rotor and stator,motor insulation ≥300MΩ,the motor security was significantly improved.
3. Higher approach products adopting MPPT and DSP chip method.
4. a hundred% copper wire, chilly-rolled silicon steel sheet.
five. Stainless metal 304 & 316 shaft , motor human body, screw.

NEW Developed Solar PUMP
one. Restart : Entirely Automatical restart each Early morning , or when the sunlight appears right after Cloud
two. Effectiveness : 15-20% greater than typical Controller
3. Safety From Improper Link : Can safeguard In opposition to becoming burned , in scenario some consumers Reversed panel “+” and “-” ternmials when relationship to controller
four. High Temperature Resistance : Can operate nicely underneath fifty levels situation for 24 hrs continuous operating

 

3′ Submersible Solar Pump ( Screw Pump )
 

Product Voltage (V) Power (Kw) Max. Flow    (M³/H) Max.  Head
(m)
Outlet (Inch) Diameter* Length (mm) Excess weight (Kg)
3SPS0.seventy two/20-D12/80 twelve–26 45-one hundred fifty .seventy two twenty G0.seventy five”   6.5
3SPS0.76/28-D12/120 twelve–26 one hundred twenty .76 28 G0.seventy five”   six.7
3SPS0.86/38-D12/a hundred and fifty twelve–26 a hundred and fifty .86 38 G0.seventy five”   six.8
3SPS1./thirty-D24/80 sixteen-36 forty five-one hundred fifty one 30 G0.75″ 76*four hundred 7
3SPS1.3/fifty-D24/140 sixteen-36 eighty-two hundred one.3 50 G0.seventy five”   7.2
3SPS1.8/80-D24/210 sixteen-36 a hundred-270 1.8 eighty G0.75″   7.5
3SPS1.8/100-D36/270 24-48 one hundred forty-350 1.eight a hundred G0.seventy five”   8
3SPS1.8/one hundred twenty-D36/five hundred 24-forty eight 320-800 one.8 120 G0.75″   9
3SPS2.3/a hundred and forty-D48/750 36-seventy two 480-950 two.three a hundred and forty G0.seventy five” 76*460 nine
3SPS2.3/a hundred and sixty-D72/a thousand 48-96 600-1200 2.3 a hundred and sixty G0.seventy five”   9.five
3SPS2.3/a hundred and eighty-D72/1300 72-one hundred forty four 800-1500 2.three 180 G0.75″   9.five

4′ Submersible Solar Pump ( Centrifugal Pump )
 

Model Voltage(V) Power(W) Max. Flow   (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Size(mm) Weight (Kg)
4SPSC5./28-D24/250 18-26 one hundred twenty-360 five 28 G1.twenty five” one hundred*540 twelve
4SPSC5.5/38-D36/400 24-48 200-five hundred 5.five 38 G1.twenty five” a hundred*650 twelve.five
4SPSC5.5/58-D48/750 36-72 450-900 5.five fifty eight G1.25″ a hundred*680 13.5
4SPSc6./seventy two-D72/1000 forty eight-96 600-1200 6 seventy two G1.25″ 100*740 15.5
4SPSc6.5/98-D72/1300 seventy two-a hundred and forty four 800-1500 six.five 98 G1.25″ a hundred*880 16.five
4SPSC10/thirty-D48/750 36-72 450-900 10 thirty G1.5″ a hundred*540 thirteen.5
4SPSC10/forty four-D72/one thousand forty eight-ninety six 600-1200 ten forty four G1.5″ a hundred*650 fifteen
4SPSC10/fifty seven-D72/1300 72-144 800-1500 ten fifty seven G1.5″ 100*680 15.five
4SPSC15/21-D72/one thousand 48-ninety six 600-1200 fifteen 21 G2″ one hundred*540 thirteen.five
4SPSC15/28-D72/1300 seventy two-one hundred forty four 800-1500 15 28 G2″ a hundred*620 fourteen

6′ Submersible Photo voltaic Pump ( Centrifugal Pump )

Design Impeller  Substance Voltage (V) Energy (KW) Max. Flow    (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Duration (mm) Weight (Kg)
6SPSC23/21-D72/1300 Stainless Steel 304 seventy two-one hundred forty four 800-1500 23 21 G3″ a hundred twenty five*seven hundred 23
6SPSC28/13-D72/1300 72-one hundred forty four 800-1500 28 13 G3″ a hundred twenty five*710 24
6SPSC46/7-D72/1300 seventy two-144 800-1500 forty six seven G4″ 125*690 22

NEW Photo voltaic PUMP CONTROLLER SPECIFCATION

Item Controller Voltage Very best Operating Voltage (vmp variety) Max constrained Voltage (max.Voc)
New mppt Controller 24V 17-40V 50V
36V 23-50V 68V
48V 32-63V 78V
72V 48-96V 120V

NEW MPPT Photo voltaic PUMP  ADVANTAGE :

  New MPPT Controller   Bad Quality Controller on Market
Restart Entirely Immediately restart everying Morning , or when the sunlight seems soon after Cloud V.S . Not regular, and can not restart Immediately
Efficiency 15-20% increased than frequent Controller V.S . Reduce performance
MPPT  Fuction Has mppt fuction V.S . No mppt
Input Voltage Assortment Improve much more substantial input voltage assortment to 150V.Will make the panel choice extremely straightforward, also avoid way too greater input voltage burn off the controller V.S . Quite smaller enter voltage range greatest only to 85V, and will be burnt if the panel voltage raises throughout the quite shinning daytime
Defense Against Incorrect Relationship Can safeguard From becoming burned , in circumstance some clients Reversed panel “+” and “-” ternmials when connection to controller V.S . No Safety, will be Burned Certainly
Substantial Temperature Resistance Can run nicely under 50 degrees situation for 24 hrs continually V.S . Will be burned, if tempreture more than 40 degrees
Operation Really Hassle-free to Open the Box to change the Velocity Change V.S . Not Practical, wants Screwdriver to open up the 4 bolts each time
Guarantee 3 Many years V.S . No guarantee or longest as 1 year

 

US $10-50
/ Piece
|
1 Piece

(Min. Order)

###

Max.Head: >150m
Max.Capacity: >400 L/min
Driving Type: Motor
Material: Stainless Steel
Structure: Multistage Pump
Assembly: Booster Pump

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Voltage (V) Power (Kw) Max. Flow    (M³/H) Max.  Head
(m)
Outlet (Inch) Diameter* Length (mm) Weight (Kg)
3SPS0.72/20-D12/80 12–26 45-150 0.72 20 G0.75"   6.5
3SPS0.76/28-D12/120 12–26 120 0.76 28 G0.75"   6.7
3SPS0.86/38-D12/150 12–26 150 0.86 38 G0.75"   6.8
3SPS1.0/30-D24/80 16-36 45-150 1 30 G0.75" 76*400 7
3SPS1.3/50-D24/140 16-36 80-200 1.3 50 G0.75"   7.2
3SPS1.8/80-D24/210 16-36 100-270 1.8 80 G0.75"   7.5
3SPS1.8/100-D36/270 24-48 140-350 1.8 100 G0.75"   8
3SPS1.8/120-D36/500 24-48 320-800 1.8 120 G0.75"   9
3SPS2.3/140-D48/750 36-72 480-950 2.3 140 G0.75" 76*460 9
3SPS2.3/160-D72/1000 48-96 600-1200 2.3 160 G0.75"   9.5
3SPS2.3/180-D72/1300 72-144 800-1500 2.3 180 G0.75"   9.5

###

Model Voltage(V) Power(W) Max. Flow   (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Length(mm) Weight (Kg)
4SPSC5.0/28-D24/250 18-26 120-360 5 28 G1.25" 100*540 12
4SPSC5.5/38-D36/400 24-48 200-500 5.5 38 G1.25" 100*650 12.5
4SPSC5.5/58-D48/750 36-72 450-900 5.5 58 G1.25" 100*680 13.5
4SPSc6.0/72-D72/1000 48-96 600-1200 6 72 G1.25" 100*740 15.5
4SPSc6.5/98-D72/1300 72-144 800-1500 6.5 98 G1.25" 100*880 16.5
4SPSC10/30-D48/750 36-72 450-900 10 30 G1.5" 100*540 13.5
4SPSC10/44-D72/1000 48-96 600-1200 10 44 G1.5" 100*650 15
4SPSC10/57-D72/1300 72-144 800-1500 10 57 G1.5" 100*680 15.5
4SPSC15/21-D72/1000 48-96 600-1200 15 21 G2" 100*540 13.5
4SPSC15/28-D72/1300 72-144 800-1500 15 28 G2" 100*620 14

###

Model Impeller  Material Voltage (V) Power (KW) Max. Flow    (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Length (mm) Weight (Kg)
6SPSC23/21-D72/1300 Stainless Steel 304 72-144 800-1500 23 21 G3" 125*700 23
6SPSC28/13-D72/1300 72-144 800-1500 28 13 G3" 125*710 24
6SPSC46/7-D72/1300 72-144 800-1500 46 7 G4" 125*690 22

###

ITEM Controller Voltage Best Working Voltage (vmp range) Max limited Voltage (max.Voc)
New mppt Controller 24V 17-40V 50V
36V 23-50V 68V
48V 32-63V 78V
72V 48-96V 120V

###

  New MPPT Controller   Poor Quality Controller on Market
Restart Totally Automatically restart everying Morning , or when the sun appears after Cloud V.S . Not steady, and cannot restart Automatically
Efficiency 15-20% higher than common Controller V.S . Lower efficiency
MPPT  Fuction Has mppt fuction V.S . No mppt
Input Voltage Range Increase much larger input voltage range to 150V.Will make the panel selection very easy, also avoid too higher input voltage burn the controller V.S . Very smaller input voltage range largest only to 85V, and will be burnt if the panel voltage increases during the very shinning daytime;
Protection Against Wrong Connection Can protect Against being burned , in case some customers Reversed panel "+" and "-" ternmials when connection to controller; V.S . No Protection, will be Burned Definitely
High Temperature Resistance Can run well under 50 degrees condition for 24 hours continually; V.S . Will be burned, if tempreture more than 40 degrees;
Operation Very Convenient to Open the Box to change the SPEED SWITCH; V.S . Not Convenient, needs Screwdriver to open the 4 bolts every time;
Warranty 3 Years V.S . No warranty or longest as 1 year;
US $10-50
/ Piece
|
1 Piece

(Min. Order)

###

Max.Head: >150m
Max.Capacity: >400 L/min
Driving Type: Motor
Material: Stainless Steel
Structure: Multistage Pump
Assembly: Booster Pump

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Voltage (V) Power (Kw) Max. Flow    (M³/H) Max.  Head
(m)
Outlet (Inch) Diameter* Length (mm) Weight (Kg)
3SPS0.72/20-D12/80 12–26 45-150 0.72 20 G0.75"   6.5
3SPS0.76/28-D12/120 12–26 120 0.76 28 G0.75"   6.7
3SPS0.86/38-D12/150 12–26 150 0.86 38 G0.75"   6.8
3SPS1.0/30-D24/80 16-36 45-150 1 30 G0.75" 76*400 7
3SPS1.3/50-D24/140 16-36 80-200 1.3 50 G0.75"   7.2
3SPS1.8/80-D24/210 16-36 100-270 1.8 80 G0.75"   7.5
3SPS1.8/100-D36/270 24-48 140-350 1.8 100 G0.75"   8
3SPS1.8/120-D36/500 24-48 320-800 1.8 120 G0.75"   9
3SPS2.3/140-D48/750 36-72 480-950 2.3 140 G0.75" 76*460 9
3SPS2.3/160-D72/1000 48-96 600-1200 2.3 160 G0.75"   9.5
3SPS2.3/180-D72/1300 72-144 800-1500 2.3 180 G0.75"   9.5

###

Model Voltage(V) Power(W) Max. Flow   (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Length(mm) Weight (Kg)
4SPSC5.0/28-D24/250 18-26 120-360 5 28 G1.25" 100*540 12
4SPSC5.5/38-D36/400 24-48 200-500 5.5 38 G1.25" 100*650 12.5
4SPSC5.5/58-D48/750 36-72 450-900 5.5 58 G1.25" 100*680 13.5
4SPSc6.0/72-D72/1000 48-96 600-1200 6 72 G1.25" 100*740 15.5
4SPSc6.5/98-D72/1300 72-144 800-1500 6.5 98 G1.25" 100*880 16.5
4SPSC10/30-D48/750 36-72 450-900 10 30 G1.5" 100*540 13.5
4SPSC10/44-D72/1000 48-96 600-1200 10 44 G1.5" 100*650 15
4SPSC10/57-D72/1300 72-144 800-1500 10 57 G1.5" 100*680 15.5
4SPSC15/21-D72/1000 48-96 600-1200 15 21 G2" 100*540 13.5
4SPSC15/28-D72/1300 72-144 800-1500 15 28 G2" 100*620 14

###

Model Impeller  Material Voltage (V) Power (KW) Max. Flow    (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Length (mm) Weight (Kg)
6SPSC23/21-D72/1300 Stainless Steel 304 72-144 800-1500 23 21 G3" 125*700 23
6SPSC28/13-D72/1300 72-144 800-1500 28 13 G3" 125*710 24
6SPSC46/7-D72/1300 72-144 800-1500 46 7 G4" 125*690 22

###

ITEM Controller Voltage Best Working Voltage (vmp range) Max limited Voltage (max.Voc)
New mppt Controller 24V 17-40V 50V
36V 23-50V 68V
48V 32-63V 78V
72V 48-96V 120V

###

  New MPPT Controller   Poor Quality Controller on Market
Restart Totally Automatically restart everying Morning , or when the sun appears after Cloud V.S . Not steady, and cannot restart Automatically
Efficiency 15-20% higher than common Controller V.S . Lower efficiency
MPPT  Fuction Has mppt fuction V.S . No mppt
Input Voltage Range Increase much larger input voltage range to 150V.Will make the panel selection very easy, also avoid too higher input voltage burn the controller V.S . Very smaller input voltage range largest only to 85V, and will be burnt if the panel voltage increases during the very shinning daytime;
Protection Against Wrong Connection Can protect Against being burned , in case some customers Reversed panel "+" and "-" ternmials when connection to controller; V.S . No Protection, will be Burned Definitely
High Temperature Resistance Can run well under 50 degrees condition for 24 hours continually; V.S . Will be burned, if tempreture more than 40 degrees;
Operation Very Convenient to Open the Box to change the SPEED SWITCH; V.S . Not Convenient, needs Screwdriver to open the 4 bolts every time;
Warranty 3 Years V.S . No warranty or longest as 1 year;

Types of pulleys and their advantages and disadvantages

There are several types of pulleys. Learn the basic equations of the pulley system. Then learn about the different uses for pulleys. The disadvantages of using pulleys will be covered. Knowing these, you can buy the pulley that suits your needs. Here are some of the best pulley types and their pros and cons.
pulley

Basic equations of pulley systems

A pulley system is a mechanism that allows two blocks of a certain mass to be connected by a taut rope. The acceleration of each block is the same in magnitude and direction. The external force acting on each block is the weight of the block (10g) and the tension in the string. The tension between the two blocks is the total tension and the force acting on the pulley is the weight of the two blocks.
This simple mechanism uses two simple equations to explain how the system works. First, the mass of the weight on both sides of the pulley must be the same. When the weight is forced to move, the rope tightens and the second pulley descends. The weight is also attached to the second pulley and must be the same distance as the first pulley. This will result in a speed ratio of 2 times the distance covered by the first pulley.
Second, we have to calculate the force required to lift the object. The lower mass is supported by a wire configuration passing through all pulleys, while the uppermost pulley is used to apply the force. The lower block is used to support the weight. The applied force needs to travel a distance nx to move the weight. This distance, called MA, can be written as:
Once we have gathered the necessary information, we can apply the calculations to the pulley system. We can also use the Mechanical Advantage Calculator to calculate the force on the anchor. To do this, we must apply a force to the load as well as to the pulley itself. Using this equation, we can calculate the force required by the load to lift the load.
pulley

Types of pulleys

There are three basic types of pulleys: movable, fixed and compound. Both types of pulleys translate the force applied to them. The ideal mechanical advantage of pulleys is two. This is because a single movable pulley only doubles the force, whereas a compound pulley doubles or triples the force. This type of pulley is often used with other types of pulleys.
Movable pulls move with the weight of the load, and the force pulling them increases on the lift side. They are often found in utility elevators and construction cranes. These systems are very simple, inexpensive and quiet to use. The force required to lift the object depends on the mechanical advantage of the system. The two most common types of pulleys are listed below. Let’s take a closer look at each one.
V-shaped pulleys are used in vehicles and electric motors. These pulleys require a “V” belt to function properly. Some have multiple “V” grooves to avoid slipping. They are used in heavy duty applications to reduce the risk of power slip. These pulleys also have more than one “V” groove. V-belt pulleys are commonly used in vehicles and electric motors.
Composite pulleys are made from more than one type of cable or rope wrapped around the wheel. They can be fixed or hinged and are usually made of stainless steel or bronze. Composite pulleys have multiple layers and can be a single unit or many different components. There are three main types of pulleys: fixed pulleys and composite pulleys. These are the most common types. Almost every type of pulley is used for some type of application.
Fixed pulleys have one advantage over movable pulleys: they change direction as the weight of the load increases. They are typically used in heavy construction equipment. Gun tackles, patio tackles, and stationary tackles are examples of equipment that use a pulley mechanism. These devices are very common and can be found on most modern construction sites. They provide great convenience for lifting large loads.

application

What are the applications of pulleys? Simply put, a pulley is a mechanical device that transforms a difficult task into an easier one. It consists of ropes and pulleys. It is usually used to lift objects. Usually, people wrap a rope around a pulley and pull up to lift the object. One disadvantage of using pulleys is that they require the same force as lifting the object directly.
One of the most popular applications of pulleys is lifting heavy objects. They help people pull up heavy objects and blocks. The system can also be used in seeders, lifts, grinders, etc. Other applications include raising flags, loading cargo, pulling curtains and rock or mountain climbing. Students can learn about the various uses of pulleys and the physics behind them.
Pulleys can be made of many different materials, depending on the application. Some are movable, which means they move with the object they are used to lift. This pulley system can be made of nylon, wire rope or fiber material. The best part about these systems is that they are easy to install and maintain. For a better grasp, use the guide or video tutorial to learn more about the pulley system and how it works.
Tapered pulleys are common in paper mills. They are high-quality pulleys that transmit power to connected parts. They can be dynamic or static and have different balances. Because pulley systems are highly customized, most industrial applications require systems designed specifically for specific applications. In this way, the system is safe, simple and inexpensive. The benefits of this design are endless.
The most common use of pulleys is for motor drives. They are used to minimize noise by applying force to the shaft to reduce the workload. They are also less expensive than gears and do not require lubrication. Furthermore, they can change the direction of the applied force. They are also less expensive than gears and are often used with other components. A screw is a cylindrical member with helical ribs used to connect something.
pulley

shortcoming

Although the pulley system makes it easier to move heavy objects, it still has some drawbacks. When using a pulley system, you must remember that the force required to lift the weight increases with the number of cycles. In addition, the distance between the puller and the heavy object increases, which may lead to accidents. Also, moving heavy objects can be tricky if the rope slips. Pulley systems are not very expensive and can be easily assembled. However, it does require a lot of space.
First, it is not efficient. Besides being inefficient, pulleys produce different forces at different speeds. Fixed pulleys use more force than the load, while movable pulleys move with the load. A movable pulley requires less force than a fixed pulley, but the combined system travels a long distance. Therefore, this method is not as efficient as the fixed method.
Pulleys are not only used in industrial processes. You can see them in various places in your daily life. For example, large construction cranes use pulleys to lift heavy loads. Even flagpoles, blinds, clotheslines, ziplines, motors and climbing equipment use pulleys. Still, despite their advantages, the disadvantages are not too serious.
Another disadvantage of the pulley is its wear and tear. While a pulley’s housing is theoretically infinite, its bearings and locking components typically wear out over time. To overcome this problem, a new bearing and locking assembly can be installed. No need to replace the housing and shaft, the entire assembly can be re-bonded and painted to replicate the original look. Alternatively, the pulley can be replaced with a new housing and shaft.
Using pulleys can also reduce the advantage of pulleys. On the other hand, interception and tackle is a system in which two pulleys are connected to each other using ropes. Unlike pulleys, pulley pulley systems can be adjusted in the direction of travel and can move heavy loads up to four times their force when used in hydraulic lifts.

China 3inches Helical Rotor Solar Pump, Water Pump, Pupming Pump, Vacuum Pump     with Great quality China 3inches Helical Rotor Solar Pump, Water Pump, Pupming Pump, Vacuum Pump     with Great quality
editor by czh 2022-11-28